Banner Making as Simple as 1 – 2 – 3 !
28 Jul
Visit www.signwarehouse.com for our complete video library! Banner Making is very simple! Here’s how it’s done. Step 1) Prepare the Substrate We need to remove any lint or debris which may be on your banner. Use a cleaning agent to wipe these materials. Step 2) Pre-Mask the Graphic Using the Pre-Mask tape dispenser, lay down a layer of Pre-Mask tape over the pre-cut, pre-weeded vinyl graphic. If your graphic is large, you may need to overlap the tape to cover the entire graphic. Step 3) Mark the Substrate Proper alignment is very important. Mark the center of your substrate. This includes the top, bottom, and sides. Step 4) Mark the Graphic Repeat the same steps as above. Making sure to align to use the same measurements from the substrate. Step 5) Hinge the Graphic Lay the graphic down and hinge it into place using masking tape. Step 6) Remove the Liner and Squeegee the Graphic. Do this for both the left and right sides. Step 7) Remove the “App Tape” or Pre-Mask Tape. It is best to pull the “App Tape” back onto itself to reduce the chances of the vinyl pulling off with the tape. It’s all in using the correct angle. Step
Squeegee again using a Teflon Sleeve. The Teflon sleeve reduces the chances of damaging the exposed vinyl. Congratulations you’ve made a banner! SignWarehouse has all the equipment, tools, software, supplies, and over 21 years of experience to get your business started. Contact us today at 800-899-5655 or logon to www.SignWarehouse.com Today …
Video Rating: 4 / 5


(out of 4 reviews)


(out of 6 reviews)